| BMW |
GS 90010
|
Types of surface protection for metallic materials |
| GS 90011 |
Coating of parts made of metallic materials by means of organic materials
|
GS 95011-4
|
Dewing test
|
| GS 95024-3-1 |
Electrical and electronic components in motor vehicles – Environmental requirements and testing |
GS 96007
|
Gas-shielded Arc Welding (SG) of Steel
|
GS 97038
|
Determination of burning behavior to automotive interior trim materials |
GS 90010-1
|
Types of surface protection for metallic materials
|
AA-0180
|
Cross hatch testing
|
| BOSCH |
| 1 279 926 749 |
Washing process for bondable and/or adhesive aluminum components |
1 279 921 180
|
Prüfvorschrift für Restschmutz
|
| FIAT |
7G2000
|
Determining the resistance to combustion of the non -metallic materials for parts inside vehicle passenger compartment
|
9. 57405
|
Zinc plating for ferrous metal parts (cast-iron, carbon, or alloy steels)
|
| FORD |
WSS-M15P4-F
|
Assembly performance, hard mold-in-color interior components
|
BO 131-03
|
Interior Odor Test
|
| GM (GENERAL MOTORS) |
GME 00201
|
Organic Coat Finish for Chassis Components
|
GMI 60206
|
Determination of Resistance to Corrosion of Automotive Components by Salt Spray Fog Testing
|
GMW3172
|
General Specification for Electrical/Electronic Components – Environmental/Durability
|
|
| MARCEDEZ BENZ (DAIMLER CRYSLER) |
DC-10611 Rev. A
|
E/E Component Environmental Testing Specifications
|
DC-10612
|
E/E Component Test Selection Process
|
49 CFR 571.302
|
Flammmability of Interior Materials
|
DBL 5307
|
Supply Specification Flame retardant properties
|
DBL 5410_2010-08
|
SupplySpecification Thermoplastic parts for control elements, bearing elements, fasteners, and spacers
|
DBL 6992
|
Dewatering Fluids with and without Anticorrosion Additives
|
DBL 7381_2008-10
|
SupplySpecificationCoatingformajorpassengercarcomponents/bodypanelsandotherfunctionalparts*withhigh corrosivestress |
DBL 5410
|
Test methods and general requirements
|
DBL 5555
|
SupplySpecification Finished parts and semi-finished products made of organic polymer materials
|
DBL 7381
|
Coating for major passenger car components/body panels and other functional parts with high corrosive stress
|
DBL 7381
|
Coating for major passenger car components/body panels and other functional parts with high corrosive stress
|
MBN 10494-5
|
Paint test methods - Part 5: Technical-mechanical tests
|
DBL 5404
|
Parts manufactured from thermoplastics for the direct and indirect areas of the passenger compartment, for passenger compartment heating and ventilation, paneling and housings
|
DBL 7391
|
Coating / Painting for Parts with High Corrosive Stress
|
DBL 8451
|
Electrodeposited zinc or zinc alloy coatings for components manufactured from ferrous materials
|
MBN 10494-1
|
Lacktechnische Prüfmethoden – Teil 1: Allgemeine Anforderungen
|
MBN 10494-5
|
Lacktechnische Prüfmethoden – Teil 5: Technisch-mechanische Prüfungen
|
MBN 10494-6
|
Lacktechnische Prüfmethoden – Teil 6 : Klimatische Prüfungen
|
| NISSAN (NES) |
| 87000NDS00 |
Nissan Seat Design Specification |
| NES M0141 |
Methods of Test for Coating of Synthetic Resin |
| NES D0031 |
Marking of polimeric parts |
| NES M0094 |
Test Method of Flammability of Interior Materials for Automobiles |
| NES M0131 |
Methods of High Temperature Test for Passenger Compartment Synthetic Resin Parts |
| NES M0132 |
Methods of Thermal Cycle Testing for Plastic Parts |
| NES M0133 |
Testing Methods of Chemical Resistance for Plastic Parts |
| NES M0134 |
Falling Ball Impact Test Methods for Synthetic Resin Parts |
| NES M0135 |
Weatherability and Light Resistance Test Methods for Synthetic Resin Parts |
| NES M0159 |
Testing Methods of the Scratch Resistance of Interior Polypropylene Resin Parts |
| NES M0160 |
Method of testing the smell of interior parts |
| NES M0301 |
Substance Use Restrictions |
| NES M0402 |
VOC test method of cabin parts |
| NES M0403 |
VOC for cabin parts |
| JIS S 6006 |
Pencil, coloured pencils and leads for them |
|
| ODPORNOST NA MEDIJE |
| ISO 1817 |
Rubber, vulcanized or thermoplastic -- Determination of the effect of liquids |
| JAGUAR JMS 20.15.08 |
Screenwash / Powerwash Solution |
| JAGUAR JMS 20.04.03 |
Brake Fluid - Super Dot 4 |
| JAGUAR JMS 20.24.01 |
Composition of Standard Test Fuels |
| JAGUAR JNS 30.14.24 |
Resistance to Fluids Dip/Dry Method |
|
| OPEL |
| QK 000 595 |
Engineering Material Specification - Elastomer modified polypropylene |
| QK 002 600 |
Engineering Material Specification - PA 6 |
| QK 003 200 |
Engineering Material Specification - PMMA |
| QK 001 113 |
Engineering Test Specifications - Fusion Weldet Joints |
| QK 001 131 |
Engineering Test Specifications - Fusion Weldet Joints |
|
| PSA - PEUGEOT - CITROEN |
| B51 1110 |
Metallurgical Requirements |
| A32 4140 |
Tolerances non specifiees pieces plastiques |
| 815 2220 |
Thermochemical Treatments - Case Hardening- Carbonitriding |
| B15 4101 |
Electrolytic Zinc Coatings and Associated Finishes Tie Process |
| B15 4140 |
Coatings Electrolytic Chromium Plating on Plastic Parts |
| B15 5220 |
Barvna površinska zaščita - nanos na kovinske mehanske dele |
| B54 1120 |
Aluminij in njegove zlitine - livarske zlitine - zlitina za odlitke |
| B62 0020 |
Plastic Parts Specific Material Requirements |
| B62 0030 |
Thermoplastic, Thermosetting Materials, Thermoplastic Elastomers And Rubbers- Specifications |
| B62 0200 |
Plastic Parts Specific Material Requirements |
| B62 0300 |
Thermoplastic, Thermosetting Materials, Thermoplastic Elastomers And Rubbers- Classification |
| D35 1205 |
Case Hardened or Carbonitrided Parts - Hardness Gradient |
| D35 1872 |
Case Hardened or Carbonitrided Parts - Thickness or Treated Layers |
| D42 1235 |
Rubber and Plastiv Parts - Behaviour to Impact (Falling Weight Method) |
| D45 1234 |
Parts Contaning Plastic Elements- Reaction to heat in a non-radiant dry oven |
| D45 5232 |
Vehicle Equipment Thermal Resistance (artificial sunlight without ultraviolet) |
| D47 1279 |
Plastic Components behaviour when in contact with protection and protection removal products |
| D47 1309 |
Materials and Parts for Motor Equipment Ageing according to given Climatic Cycle |
| D47 1309 (2007) |
Materials and Parts for Motor Equipment Ageing following a given Climatic Cycle |
|
| RENAULT |
| 3703012 |
Validation of the Resistance of the Polymer Materials to Ageing in Light and to stress of Weather |
| 00 10050 |
Prohibited and Restricted Substances List and Declaration Modes |
| 00 10415 |
Manufacture and Supply of Products General Requirements |
| 3407005 |
Cleanliness of the Oil System FOR ALL Types of the Vehicles |
| D42 1775 |
Inside And Outside Plastic Parts Resistance To Scratching By Abrasion |
| D45 1010 |
Polymer Materials And Parts Inside And Outside Passenger Compartment - Colourfastness To Rubbing |
| D45 1837 |
Paint Coatings On Plastic Parts And Mass - Staining Of Colored Materials By Automotive Fluids |
| D47 1165 |
Accelerated Ageing- Product applied for Bonding, Sealing, Anti-gritting, Damping, Anti-Corrosion and Protection Functions |
| D47 1279 |
Plastic and Rubber Parts Resistance to Bodywork Conditioning and Deconditioning Products |
| D49 3091 |
Resistance to Whitening by Hot Soapy Water of Parts in Styrene Materials for the Exterior |
| 00 10050 |
|
| 00 10060 |
Conception with the aim of Recycling |
| 00 10420 |
Material Reference Sheet Definition and Elaboration |
| 03 10100 |
Compact Vulcanized Rubbers - Classification- Symbols - Properties |
| 1600003 |
Plastic Parts - General Requirements |
| 3100805 |
Plastic Parts - Insert Rotation Resistance |
| 3200008 |
Interior Trim Parts General Requirements. |
| 3612009 |
Window Washing Fluid Lines |
| 4701002 |
Decorative Electrolytic Coatings on Plastic Parts |
| 1234 |
Pars with Plastic Elements Heat Behaviour in a non-radiating Dry Owen |
| 1528 |
Vulcanized Rubber and Flexible Plastic Low Temperature Rigidity Gehman Method |
| D17 1058 |
Neutral Salt Spray Test |
| D41 1099 |
Tensile Strength Vulcanized Rubbers And Thermoplastic Rubbers |
| D41 1507 |
Rubbers Tearing Strength (Delft Specimens) |
| D42 1235 |
Plastic Or Rubber Parts Impact Behaviour (mass Drop Method) |
| D45 1132 |
Compact Rubbers - Compression Set At Constant Deformation |
| D45 1333 |
Horizontal Flammability (materials Inside Passenger Compartment) |
| D47 1020 |
Coatings And Parts In The Passenger Compartment - Colour Fastness To Water, Sea Water And Perspiration |
| D47 1053 |
Vulcanised Rubbers And Elastomersthermoplastics Accelerated Ageing In Air |
| D47 1098 |
Rubbers - Thermoplastic Rubbers - Thermoplastics And Thermosettings Ageing In The Liquids And The Greases |
| D47 1100 |
Rubber Parts - Ageing In Ozonized Air |
| D47 1407 |
Rubbers And Plastics - Effect Of Protective Coating Products in the Engine Compartment |
| D47 1748 |
Plastics- Ageing In Fluids |
| D47 1924 |
Plastics And Rubbers - Occassional Contact With Automobile Fluids |
| SCANIA |
| STD4319 |
Accelerated corrosion test - Atmospheric corrosion |
| STD4165 |
Corrosion protection surface coatings – Flake coatings and electrolytic zinc coatings |
| STD4111 |
Surface treatment - Directives and instructions |
| STD4158 |
Chemical substances which must not be used – Scania Black list |
| STD4159 |
Chemical substances with limited use - Scania Grey list |
|
| TOYOTA |
| TSM5500G |
Thermoplastic Polyurethane Materials |
|
| VOLKSWAGEN |
| PV 2005 |
Vehicle Parts Testing of Resistance to Environmental Cycle Test |
| PV 1210 |
Climate Corrosion Test Cycle (Salt Spray Test Standard) |
| PV 3015 |
Non-Metallic Materials for Interior Trim Determining Condensable Constituents (G) |
| PV 3341 |
Non-Metallic Materials for Interior Trim - Emission of Organic Compounds |
| PV 3347 |
Cleanliness of Engine Components Determining Residual Particle Quantities |
| PV 3900 |
Components in Passenger Compartment Odor Test |
| PV 3925 |
Polymer Materials Measuring Emissions of Formaldehyde |
| PV 1015 |
Kontaktkorrosion Elastomere durch und Kunststoffe in Verbindung mit Leichtmetallen, Prufung des spezifischen Durchgangswiderstandes |
| PV 1200 |
Vehicle Parts Testing of Resistance to Environmental Cycle Test (+80/-40) °C |
| PV 1303 |
Non-Metallic Materials Exposure Test of Passenger Compartment Components |
| PV 1400 |
Schmierfette Festschmierstoffgehalt. Siebtest |
| PV 3341 |
Determination of emisssion of organic compounds |
| PV 3345 |
VW AG Konzernnorm: Automatikgetriebe und periphere Baugruppen: Prüfung auf Restschmutz |
| PV 6097 |
Porosity Determination According to VW 50097 |
| VW 50014 |
General Requirements for Components and Semi-Finished Products Requirements and Tests |
| VW 50097 |
Porosity of Metal Castings Requirements |
| VW 80000 |
Electric and Electronic Components in Motor Vehicles up to 3,5 t, General Requirements, Test Conditions and Tests |
| VW 01134 |
Cleanliness Requirements for Engine Components |
| VW 13750 |
Surface Protection of Metal Parts Surface Protection Types, Codes |
| VW 44045 |
Polypropylene, Finished Parts Material Requirements |
| VW 50097 |
Porosity of Metal Castings Requirements |
| VW 50123 |
ThermoplasticElastomersQualityRequirements |
| VW 50180 |
Components in Passenger Compartment Emission Behaviour |
| VW 50185 |
Resistance to Open-Air Weathering |
| VW 50190 |
Metrological Evaluation of Color and Gloss Level Visual Evaluation of Chrome Surfaces |
| VW 91100 |
Environmental Standard for Vehicles, Policy, Specifications |
| VW 91101 |
Vehicle Parts, Materials, Operating Fluids Avoidance of Hazardous Substances |
| VW 96043 + PN 780 |
Interieur Emissionsverhalten |
| VW 96390 + PPV 4050 |
Bestimmung flüchtiger, organischer Emissionen aus nicht Kraftstoff beaufschlagten Bauteilen, Emissionsmessung in SHED-Kammern |
| VW 50181 |
Fogging ; Determination Of The Foggincharacteristics |
| VW 01137 |
Area Conveying Media Cleanliness Requirements for Components that Convey Coolant |
| VW 50133 |
PA66 für Fertigteile außerhalb des Fahrzeuginnenraumes Werkstoffanforderungen |
| TL 212 |
AnodizedCoatingsonAluminumParts RequirementsforSurfaceProtection |
| TL 217 |
Zinc Coatings Surface Protection Requirements |
| TL 233 |
Non-ElectrolyticallyAppliedZincFlakeCoatingswithTopCoat SurfaceProtectionRequirements |
| TL 244 |
Zinc/Nickel Alloy Coatings Surface Protection Requirements |
| TL 245 |
Non-Electrolytically Applied Zinc Flake Coatings Surface Protection Requirements |
| TL 778 |
Tieftemperaturfett Schmierstoffanforderungen |
| TL 1010 |
Burning Behaviour/Flammability |
| TL 52035 |
PP/EPDM/PEPolymerBlend,FinishedPartsMaterialRequirements |
| TL 1011 |
Testing the flammability of plastics |
| TL 52476 |
POM Werkstoffanforderungen |
| TL 82184 |
Pedal zavore Zahteve za funkcijo |
| TL 82186 |
Pedalni sklop Zahteve za funkcijo |
| TL 52636 |
POM, Fertigteile (nicht für Fahrzeuginnenraum), Werkstoffanforderungen |
| TL 909 |
Headlamp Functional Requirements |
| TL 52437 |
Polycarbonate (PC) Headlamp Covering Panes with Functional Coating Material Requirements |
| TL 260 |
Paint Coating of Metal Surfaces Requirements for Surface Protection |
| TL 52440 |
PA6, Glass-Fiber Reinforced, Finished Parts Material Requirements |
|
| VOLVO |
| STD 1021,1 |
Conditioning of painted test panels before testing |
| STD 1021,5211 |
Test Method, Test Panels Paints and enamels |
| STD 1024,7132 |
Test Method, Chip resistance |
| STD 1026,5172 |
Determination of colour in colour-matching booth |
| STD 1026,5272 |
Testing method, Gloss, Paints and enamels |
| STD 1026,8177 |
Test Method, Chemical resistance, Paints and enamels |
| STD 1027,051 |
Evaluating degrees blistering of paints |
| STD 1027,1372 |
Test Method, Accelerated outdoor exposure, Scab corrosion test |
| STD 1027,1375 |
Test Method Corrosion resistance, Accelerated atmospheric corrosion testing - Volvo Indoor Corrosion Test (VICT) |
| STD 1027,3375 |
Moisture resistance in tropical cabinet |
| STD 1029,5471 |
Test Method Adhesion, water spraying under high-pressure |
| STD 1029,5472 |
Test Method, cross-cut test; Paint and enamel |
| STD 1029,5473 |
Test Method Adhesion, Paints and enamel |
| STD 5711,102 |
Corrosion test in artificial atmospheres-salt spray tests; Inorganic coatings |
| STD 5715,102 |
Evaluation of degradation of paint coatings, Designation of degree of rusting |
| STD 5750,12 |
List of colours |
| STD 5751,5 |
Painting Y 500, Metal substrates |
| STD 423-0014 |
Accelerated Corrosion test, Atmospheric corrosion |
| STD 121-0004 |
Cathodically protective surface treatment without friction requirement Y 2000, With or without top coat |
| STD 420-0002 |
Evaluation of degradation of paint coatings, Designatiomn of degree of rusting |
| IVECO STANDARD |
| 15–0470 |
Determination of resistance to water of paints and enamels |
| 15–0488 |
Determination of abrasion resistance of protective coatings by mateallic grit-blasting |
| 15–0503 |
Determination of preservative product humidity resistance under condensation conditions |
| 15-6035 |
Scab Corrosion Test |
| 16-0180 |
Accelerated Ageing ny atmospheric agents - Method for vehicle external components |
|
| GARRETT; ALLIED SIGNAL; HONEYWELL |
| IDM 4215 |
Material Specification, DIE CAST ALUMINIUM ALLOY UNS A 13801 (AA 380 MODIFIED) |
| IDM 5371 |
Specifikacija, Odlitki iz sive litine UNS F12101 |
| IDM 5381 |
Material Specification, HIGH SILICON PLUS MOLYBDENUM DUCTILE IRON CASTINGS |
| IDM 5415 |
Industrial division material specification, SIMO CHROMIUM DUCTILE CAST IRON |
| ZF Friedrichshafen AG |
| 1000000 154595 |
Cleanliness of torque converter components |
|
| Brose Technik für Automobile |
| 590295-104 |
Chrom-VI-freie Überzüge - Technische Spezifikationen |
| 590607-103 |
Prevention of emissions from the vehicle interior |
| DEUTSCHE NORM |
| DIN 40 050 Teil 9 |
IP-Schutzarten; Schutz gegen Fremdkörper, Wasser und Berühren Elektrische Ausrüstung |
| DIN 53 516 |
Testing of rubber and elastomer, Determination of abrasion resistance |
| DIN EN IS0 2409 |
Beschichtungsstoffe - Gitterschnittprufung |
| EN ISO 12944-1 |
Corrosion protection of steel structures by protective paint systems, General introduction |
| ECSS Requirements & Standards Division |
| ECSS-Q-ST-70-26C |
Space product assurance, Crimping of high-reliability electrical connections |
|
| HELLA Norm |
| HN38011 |
Cellular Rubber - Technical Delivery Conditions - |
|
| INTERNATIONAL STANDARD |
| ISO 60068-2-58 |
Environmental testing - Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices |
| ISO 16750-4 |
Road vehicles — Environmental conditions and testing for electrical and electronic equipment, Part 4: Climatic loads |
| ISO 20567-1 |
Paints and varnishes — Determination of stone-chip resistance of coatings — Part 1: Multi-impact testing |
| ISO 945 |
Cast iron - Designation of microstructure of graphite |
| ISO 16232-4 |
Road vehicles - Cleanliness of components of fluid circuits - Part 4: Method of extraction of contaminants by ultrasonic techniques |
| ISO 16232-7 |
Road vehicles - Cleanliness of components of fluid circuits - Part 7: Particle sizing and counting by microscopic analysis |
| ISO 16232-10 |
Road vehicles - Cleanliness of components of fluid circuits - Part 10: Expression of results |
| ISO 16750-1 |
Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 1: General |
| ISO 16750-2 |
Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 2: Electrical loads |
| ISO 16750-3 |
Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 3: Mechanical loads |
| ISO 16750-4 |
Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 4: Climatic loads |
| ISO 16750-5 |
Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 5: Chemical loads |
| JEDEC STANDARD |
| JESD22-B102D |
Solderability |
|
| Japanese Industrial Standard |
| JIS D 0203 |
Method of moisture, rain and spray test for automobile parts |
| JIS D 5500 |
Automobile parts - Lighting and light signalling devices |
| SOUTH AFRICAN NATIONAL STANDARD |
| SANS 4541:1978 |
Metallic and other non-organic coatings — Corrodkote corrosion test (CORR test |
|
| MIL-STD-81 OF |
| METHOD 505.4 |
SOLAR RADIATION (SUNSHINE) |
| METHOD 506.4 |
RAIN |
| METHOD 507.4 |
HUMIDITY |
| METHOD 509.4 |
SALT FOG |
| METHOD 510.4 |
SAND AND DUST |
| METHOD 521.2 |
IClNGlFREEZlNG RAIN |
| MATERIAL SPECIFICATON (KIA, HYUNDAI) |
| MS210-05 |
MOLDED PLASTIC PARTS - INTERIOR |
| MS211-46 |
POLYAMIDE 66 (NON-REINFORCED) |
| MS 213-52 |
FILLED PP – FOR SCRATCH & IMPACT RESISTANT |
| MS 213-58 |
UNFIELD POLYPROPYLENE FOR DOOR TRIM |
| MS225-18 |
ABS – HEAT RESISTANCE |
| MS300-34 |
odor evaluation methods of interior materials for automobile. |
| MS300-54 |
STANDARD TEST METHOD – FOGGING |
| MS 300-55 |
TEST METHOD OF VOLATILE ORGANIC COMPOUNDS FROM VEHICLE INTERIOR PARTS |
| MS210-05 |
MOLDED PLASTIC PARTS – INTERIOR USE |
| MS 300-08 |
FLAMMABILITY RESISTANCE – INTERIOR MATERIALS |
| PIRELLI |
| P 84 |
RAW MATERIALS TEST METHOD, DETERMINATION OF TOTAL TRANSMITTANCE IN POLYTHENE SHEET |
| P 135 |
RAW MATERIALS TEST METHOD, DETERMINATION OF MELTING POINT OF POLYTHENE BY MEANS OF DSC |
| SEA |
| J575 |
Tests for Motor Vehicle Lighting Devices and Components |
| J1756 |
Determination of the Fogging Characteristics of Interior Automotive Materials |
| SUZUKI (SES) |
| SES N 3133 |
Salt Spray Test Methods for Surface Treatment on Metal-Based Materials |
|
| JAGUAR LAND ROVER |
| STJLR.51.5262 |
Performance Requirements Of Non- Decorated Plastics |
| STJLR.99.9999 |
Restricted Substance Management Standard |
| GKN |
| TL-99060000005 |
Technical Delivery Requirements, Powder coating/UV Painting |
|
| VDA |
| VDA 237-299 |
Surface protection for the brake calipers made of cast iron |
| VDA 270 |
Determination Of The Odour Characteristics Of Trim Materials In Motor Vehicles |
| VDA 621-415 |
Testing of Corrosion Protection of Vehicle Paint by Alternating Cycles Test |
|
| VDG |
| P202 |
Volume Deficits of Castings Made from Aluminium, Magnesium, and Zinc Casting Alloys |
| P201 |
VolumeDeficitsofNon-FerrousMetalCastings |
| ZFL |
| 7036 050 129 |
Porenklassifikation bei Druckstücken und Stellschrauben aus Aluminium- und Zinkdruckguss |
| 864-5 V |
TECHNISCHE LIEFERBEDINGUNGEN FUER ZWJSCHENLAGEN UNTER SCHIENEN |
| EN 12345 |
Welding - Multilingual terms for welded joints with illustrations |
| SIST ISO 3795:1999 |
Cestna vozila, traktorji ter kmetijski in gozdarski stroji - Ugotavljanje obnašanja notranjih oblog v požaru |
| SIST ISO 12040:1997 |
Grafična tehnologija - Odtisi in tiskarske barve - Ugotavljanje obstojnosti s filtrirano svetlobo ksenonske žarnice |
| SIST-TS 16949 |
Sistemi vodenja kakovosti |
| 0445 CZ4030 |
Prüfvorschrift Sauberkeitsprüfung für CP4 – O-Ringe |
|
| LAND ROVER |
| LRLTM.30.MS.302 |
Flammability of interior materials |